The Vibe Shearwater 125 X-Drive is supplied loaded with built-in fishing features. You will find the 12.5 ft hull to be both quick and efficent. Designed to be used in both salt and fresh water it is also stable enough to be used for stand-up casting on calm waters.

The Phantom Grip Carry handles are semi-rigid so they don't trap your knuckles when lifting the kayak. There are two 'Heavy Load Handles' either side on the underside of the hull at the stern. These are a great help if you need to move your kayak around when it is loaded with gear or you have a crate full of fish on-board!

Supplied as standard with a Versa Pod, and the Vibe fin powered X-Drive, the Shearwater XD is a great choice for fishing in deep or shallow water. If you want to take it out for a paddle then slot in the Versa Pod, set the adjustable footpegs to the right length and off you go. If you want to go hands free pedal fishing then it takes only a few minutes to swap out the Versa Pod and slot in the X-Drive! You can also go Electric with the optional Bixpy Drive Kit and rudder adaptor!

The Vibe Shearwater 125 is supplied with a stand-up assist strap to help you get balanced if you want to stand and fish. There are Gunnel Standing Pads either side of the Hero Seat and Noise Cancelling Deck Pads elsewhere to minimise noise disturbance below water.

Take a look at some of the features in the video below. Note the Shearwater 125 is supplied with the Hero Seat - the Summit seat is an optional extra.

Features

• Vibe Hero Framed Seat
• Under-seat Versa Drawer
• Vibe Versa Paddling Pod
• Vibe X-Drive Unit
• Vibe Phantom Grip Carry Handles
• Vibe Toe-Control Gravity Rudder System
• Four horizontal rod holders
• Four vertical rod holders
• Four tackle tray slots
• Comfortable, Adjustable Foot Braces
• Integrated Slide Track Accessory Rails
• 2x Side Bungee Paddle Parks
• Fast Access Bow Paddle Park
• Rear Cargo Storage Area With Bungees
• Stand-up assist strap
• Tackle Tray Holders: Fits PLANO 3600 tackle tray
• Noise Cancelling Deck Pads
• Built-In Cup Holder
• Drain Bung

Dimensions

• Length: 12' 6" | 381cm
• Width: 35" | 88.9cm
• Hull Weight: 82lbs | 37.1kg
• Fully Loaded Weight: 109lbs | 49.45kg
• Manufacturers Weight Capacity: 475lbs | 216kg